ATP has revealed its new N600S-series SSDs for industrial and commercial applications. The industrial-grade SSDs are designed to offer high performance and write endurance while also offering extreme physical endurance, as well as extensive power loss protection (PLP) technology for electrical endurance.
ATP’s N600S-series drives are based on an NVMe 1.3 controller with eight NAND channels that supports Low-Density Parity-Check (LDPC) ECC with a 2 KB codeword, end-to-end data protection, and programmable RAID engine. The drives are set to be available in 120 GB, 240 GB, 480 GB, 960 GB, and 1920 GB configurations and offer sequential read/write performance of up to 3,420/3,050 MB/s, which would make them among the fastest M.2-2280 SSDs for embedded applications with a PCIe 3.0 x4 interface.
ATP plans to offer its N600S drives in in two versions: the N600Sc for commercial temperatures (0ºC - 70ºC) as well as the N600Si for industrial temperatures (-40ºC - 85ºC).
One of the key features of ATP’s N600Sc and N600Si SSDs is the company’s 4th Generation power loss protection (PLP) technology, which the company calls PowerProtector 4. The technology relies on a special microcontroller unit (MCU) that enables protection not only against power loss, but also against excessive input power noise, power-up inrush current, and input over-voltage, which is something that may happen in rough environments. The MCU can be further customized as well, so the PLP feature can be tailored towards particular customers and a particular applications.
| ATP's N600S-Series SSDs | |||||
| Capacity | 120 GB | 240 GB | 480 GB | 960 GB | 1920 GB |
| Model Number | ? | ? | ? | ? | ? |
| Controller | Unknown 8 NAND channels NVMe 1.3 LDPC w/ 2KB keyword RAID Engine |
||||
| NAND Flash | 3D TLC NAND | ||||
| Form-Factor, Interface, Protocol | M.2-2280, PCIe 3.0 x4, NVMe 1.3 | ||||
| Sequential Read | up to 3420 MB/s | ||||
| Sequential Write | up tp 3050 MB/s | ||||
| Random Read IOPS | ? | ? | ? | ? | ? |
| Random Write IOPS | ? | ? | ? | ? | ? |
| Pseudo-SLC Caching | Supported | ||||
| DRAM Buffer | Yes, capacity unknown | ||||
| TCG Opal Encryption | ? | ||||
| Power Consumption | Sleep: 1 W Operation: 3.3 W |
||||
| Operating Temperature | Commercial: 0°C (32°F) ~ 70°C (158°F) Industrial: -40°C (-40°F) ~ 85°C (185°F) |
||||
| Humidity | ? | ||||
| Shock | ? | ||||
| Operating Vibration | ? | ||||
| Warranty | ? years | ||||
| MTBF | ? hours | ||||
| TBW | ? | ? | ? | ? | 5,120 TB |
| DPWD | ? | ? | ? | ? | ? |
| MSRP | ? | ? | ? | ? | ? |
ATP did not announce MSRPs of its N600S-series SSDs, but since the company plans to offer different versions of the drives with ability to tailor them, prices will vary.
Related Reading:
- ATP Launches M.2 NVMe SSDs: 3D MLC, SMI, Extreme Temps, Up to 2.5 GB/s
- 96-Layer 3D TLC Reaches Embedded & Industrial NVMe SSDs: Transcend Reveals MTE662T
- ATP Announces eMMC5.1 3D NAND Storage For Extreme Temperatures
- Transcend Launches New PCIe M.2 SSDs: The MTE850 Series
Source: ATP
from AnandTech https://ift.tt/2SECtav
via IFTTT
0 comments:
Post a Comment